cyclone

[crazy98]

i have a cyclone on my new gun, what do i have to do to keep it oiled, and cleaned, i just didnt want to take it apart without asking how to keep it oiled ect.

[GRimm]

On the bottom of the Cyclone are i think 5 philips head screws. Take them out and use some gun oil or the oil that came with your marker. Just a couple of drops will do. Don't over tighten the little screws as it will clamp the bottom piece against the ratchet parts and cause them to not cycle correctly. Just snug em.

Also do you have an electric trigger? If so now would be a good time to install the metal ratchet system from Techt. Because the standard plastic one will not hold up to full auto from an E-trigger and you will end up having to this again. If you have any problems bring the marker down to the field and we will fix it.



                                                                                                                        GRimm

[crazy98]

ok thanks

and yes i do have an e-grip, and does bel sell the metal ratchets, and how much do they cost? i looked for them on the internet but didnt have any luck finding them.

[England]

If they don't sell them in the shop your next bet is Action Village and ebay:-

Here's a branded version :-

http://www.actionvillage.com/014-273-0001

and some cheaper alternative versions:-

http://cgi.ebay.com/Cyclone-Upgrade-Tippmann-A-5-X7-98-Feed-Ratchet-Shaft-/370393679074?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item563d2f04e2

http://cgi.ebay.com/Tippmann-A-5-X-7-Alluminum-Cyclone-Ratchet-Upgrade-/220397143017?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item3350b183e9

D.

[NealPB]

yess we do sell them $39.95 yess is expensive but its worth it in the long run. we have all upgrades for the cyclone in stock

[crazy98]

alright, im getting paid at the end of the week, and playing at bel on saturday, so ill probly get it.